Tests
| Looking for a suitable test? This is something Zandleven Engineering could arrange. Looking for a test according to a specific ISO standard. The following chart shows a few of the tests that can be performed. If you are you looking for a combination of tests because your object needs to withstand extreme conditions? That's no problem, we will work with you to choose the right amount and combination of tests. A number of these tests are also suitable for use on location, for example: measuring a Dry Film Thickness, measuring Gloss or performing a Adhesion pulloff (Dolly test). |
| Description: | Standard: | Description: | Standard: |
| Abrasion Resistance by Taber Abraser | ASTM D 6040- 90 | EIS testing | ISO 16773 |
| Adhesion CrossCut | ISO 2409 | Fineness | ISO 1524 |
| Adhesion PullOff | ISO 4624 | Gloss | ISO 2813 |
| Adhesion X-cut | ISO 16276-2 | Hot service | ISO 3248 |
| Bend test (Cylindrical Mandrel) | ISO 1519 | Immersion | ISO 2812-1 |
| Buchholz indentation | ISO 2815 | Impact Resistance | ISO 6272-1 / 6272-2 |
| Cathodic Disbonding | ISO 15711 | König Hardness | ISO 1522 |
| CCT | ISO 20340 | Outdoor Exposure | ISO 2810 |
| Chalking | ISO 4628-6 | Pencil hardness | ISO 15184 |
| Cleanliness | ISO 8501-1 | ||
| Color Analysis | ISO 7724-3 | ||
| Condens | ISO 6270-2 | QUV (UVA-340) with solar eye | ISO 16474-3 |
| Condensation - dew point | ISO 8502-4 | ||
| Contrast ratio | ISO 2814 | QUV (UVB-313) with solar eye | ISO 16474-3 |
| Roughness | ISO 8503-4 | ||
| Cupping | ISO 1520 | Salt spray | ISO 9227 |
| Solids | ISO 3251 | ||
| Density | ISO 2811-1 | Soluble salt | ISO 8502-9 |
| Dry Film Thickness | ISO 2808 | ||
| Drying test using mechanical recorder | ISO 9117-4 | Viscosity | ISO 2884-2 |
| Dust | ISO 8502-3 |